EasyManuals Logo

CARVIN QUADX User Manual

CARVIN QUADX
35 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
4.4 Effects Suggestions
Now that you have your basic Preamp/Power Amp/Speaker setup let's start evaluating effects
configurations.
Digital Multi-Effects Unit
You probably want to patch your most versatile multi-effects unit into the
master effects loop so that you will have it available for use with any channel.
Chorus, delay, and flanging effects will work great here.
Stereo Digital Reverb
Patch your stereo digital reverb into the reverb effects loop for a studio reverb
sound in full stereo. Make sure you set the mix control to 100% effects.
Stomp Box Effects
Your floor effects boxes will work great in the individual channel effects
loops. These four effects loops are always "on".
4.5 Recommended Settings
The table below contains some basic control settings that you might try.
4.6 Connecting to Another Guitar Amp
There may be occasions when you wish to connect the Quad X-Amp to another guitar amp so
that you can use that amp's power amplifier and speaker. In these situations we recommend that
you connect the preamp output from the Quad X-Amp to either the power amp input or the
effects return input of the other guitar amp in order to bypass that amps fixed equalization
circuits. The instrument input of the other guitar amp should only be used as a last resort
because this would result in the other amps fixed equalization being added to the fixed EQ used
in the Quad X-Amp.
Quad X-Amp Using the Quad X-Amp Section 4
4-3
Some Recommended Sounds and Settings
Sound Description Ch B M T Drive Bright Cloaking Suggested Effects Graphic EQ
75 150 1k 3k 6k
Clean jazz 1 8 7 3 - off - any 0 +4 0 0 0
Clean, bright 1 5 4 7 - on - chorus/flanger 0000+2
Clean, tight 2 5 - 5 - off 6-7 slap back delay 0 0 0 +4 0
Crunchy jazz 3 7 - 5 4-7 off 0 any +4 +2 0 0 0
Crunchy, bright 3 5 - 8 4-7 off 2-4 delay 0000+2
Crunchy, tight 3 5 - 5 6-10 off 5-7 reverb 00000
Driven, mellow 4 7 5 4 3-6 off - any +2 0 +4 0 -2
Driven,bright 4 5 3 7 5-7 off - chorus/flanger 0000+2
Driven, chunky 4 8 4 5 6-8 off - flanger 0 -4 0 0 0
Heavy full shred 4 8 6 5 8-10 off - any 0 +2 +4 0 +3

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the CARVIN QUADX and is the answer not in the manual?

CARVIN QUADX Specifications

General IconGeneral
BrandCARVIN
ModelQUADX
CategoryAmplifier
LanguageEnglish

Related product manuals