10
Use container in weighing.
Current weight is memorized as tare weight.
If you press TARE key in unload condition, Tare setting is released
automatically.
Use this key to switch from gross to net weight.
GROSS lamp on - gross weight
NET lamp on - net weight
In case tare weight is REGISTERED, tare and item's total weight is G. weight
and only item's weight is N. weight.
Toggles between lb and kg units.
Used to print the present weighing value.
Total weighing value print key.
HOLD key.
In CALIBRATION, TEST, SET mode.
: Store current condition and exit.
Set in F09.
3. How to enter TEST mode
Turn on the power while pressing the "PRINT" key and TEST mode starts.
4. How to enter SET mode
Turn on the power while pressing the "ENTER( )" key and SET mode starts.
5. How to enter CAL mode
Turn on the power while pressing the CAL switch on the rear panel of the
indicator and CAL mode starts.
TARE
GROSS/NET
kg/lb
PRINT
ENTER
To Next Page
Loading...
