CAS NT-505A User Manual

2

CAS NT-505A Specifications

General

Category	Accessories
Model	NT-505A
Manufacturer	CAS
Connectivity	Wired
Interface	Ethernet

Summary

Introduction and Safety Precautions

Precautions and Safety

Provides essential safety warnings and operational cautions for users.

Features and Main Functions Overview

Technical Specifications

Analog Part & A/D Conversion

Specifies the electrical and conversion parameters of the analog input.

Digital Part Specifications

Installation and Connection Guide

Load Cell Connection Guide

Guides on how to connect the load cell to the indicator.

External Connections and Power

Serial Communication (RS-232C)

RS-232C PC and Sub Display Connection

Data Format and Command Mode

Describes data transmission formats, baud rates, and remote control commands.

Test Mode Operations

Entering and Navigating Test Mode

Comprehensive Test Procedures

Calibration Mode Procedures

Calibration Entry and Menu

Steps to enter calibration and an overview of available calibration procedures.

Capacity, Division, and Zero/Span Calibration

Procedures for setting capacity, division, and performing zero and span calibrations.

Calibration Verification and National Code

How to verify calibration and use national code settings.

Weighing Mode Operations

Zero Compensation and Net/Gross Display

Digital Filter and ID Code Management

Limit Value and Total Printing

Sealing Method

Sealing Procedures

Error Messages and Troubleshooting

Weighing Mode Error Codes

Lists common error codes (CH 01-05, Over) and their troubleshooting steps.

Calibration Mode Error Codes

Details error codes (CH 11-14) related to calibration and their resolutions.