CAS PB Series Service Manual

3
Service Manual
–
PB
Series
REV NO
:
2
1. Proper Operation / Introduction
1.1. Preface
Thank you for purchasing of our CAS scale.
This scale has been designed with CAS reliability, under rigid quality control
and with outstanding performance.
WE hope that your departments enjoy with high quality of CAS product.
This manual will help you with proper operations and care of the PB(Portable Bench).
Please keep it handy for the future references.
1.2. Precaution
• Make sure that you plug your scale into the proper power outlet.
• Place the scale on a flat and stable surface.
• Plug into a power outlet 30 minutes before operations.
• Keep the scale away from strong EMI noises may cause incorrect weight readings.
• This scale must be installed in a dry and liquid free environment.
• Do not subject the scale to sudden temperature changes.
• Do not subject the platter to sudden shocks.
• If the scale is not properly level, please adjust the 4 legs at the bottom of the scale (turn
legs clockwise or counterclockwise) so as to center the bubble of the leveling gauge
inside the indicated circle.

CAS PB Series Specifications

General

Display	LCD
Overload Protection	Yes
Units	g, oz
Interface	RS-232 (optional on some models)
Auto Calibration	Yes
Operating Temperature	10°C to 40°C
Material	Stainless steel platform, ABS housing