CAS PB Series Service Manual

5
Service Manual
–
PB
Series
REV NO
:
2
Key Function
ZERO (-O-)
[Set]
To set zero point
To do [SET] key in the SETUP mode.
TARE
To input or cancel the tare (the weight of container).
HOLD
To make the weight of item stable. This weight is average value.
POWER
To turn on or off.
3. Getting Started
3.1. Sealing Method
-

CAS PB Series Specifications

General

Display	LCD
Overload Protection	Yes
Units	g, oz
Interface	RS-232 (optional on some models)
Auto Calibration	Yes
Operating Temperature	10°C to 40°C
Material	Stainless steel platform, ABS housing