20
6. How to Use Label Print (DLP Option)
- If you select “dLp”, you cannot use RS232 ECR and BLE protocol.
6-1. No Send Mode (NoSnd)
1)Mode Setting
- In this Mode, protocol is not sent to printer. First of all, You must scale’s mode setting.
Please refer to the page 10.
6-2. Key Send Mode (K-Snd)
1)Mode Setting
- This Print Mode is ‘Key Printer Mode’. Please refer to the page 10.
2)Print Operation
3)Print Out
6-3. Stable Send mode (S-Snd)
1)Mode Setting
- This Print Mode is ‘Stable Mode’. Please refer to the page 10.
①
platter, then the display will
show the weight of the
commodity.
② If press the function key
, weight is send a printer.
To Next Page
Loading...
