CAS SC Series - Add-Up Samples

1 0 CALL
ENTRY
12
5. Add-Up Samples
To add-up samples, press the M+ key when
the count display shows the quantity.
Remove the samples from the platter.
Place the samples on the platter. Press the ENTRY key, then you will see the
quantity of the sample.
C TARE
ENTRY
C TARE
M+
Remove the samples and press the C key to
clear unit weight.
Press the TARE key to clear tare weight.
Place the same samples on the platter and
press the M+ key.
Remove the samples from the platter.
M+