— 9 —
D-7. Remove two hooks and then remove the TR-CASE.
Use caution as the ENCLOSURE also comes off when disengaging the TR-CASE.
ASSEMBLING TIPS:
When assembling the TR-CASE, sandwich the MAIN PCB with the TR-CASE and the ENCLOSURE
and then engage it with hooks.
D-8. Unsolder two FCCs on the MAIN PCB.
D-9. Unsolder a FCC on the PRINTER.
Hook
Hook
TR-CASE
FFCs
FFC
Soldered parts
Soldered parts
To Next Page
Loading...
