— 3 —
2. MACHINE INTIALIZATION
2-1.Toinitializethecashregister
Note:YoumustinitializetheCashregisterandinstallthememoryprotectionbatteries
beforeyoucanprogramthecashregister.
1. Set the Mode Switch to OFF.
2. Load the memory protection batteries.
3. Plug the power cord of the cash register into an AC outlet.
4. Set the Mode Switch to REG.
2-2.Toloadthememoryprotectionbatteries
1. Remove the printer cover.
2. Open the battery compartment cover.
3. Load 3 new SUM-3 ("AA") type batteries into the compartment.
Be sure that the plus (+) and minus (–) ends of each battery are facing in the directions indicated by the
illustrations inside the battery compartment.
4. Replace the memory protection battery compartment cover back into place.
5. Replace the printer paper and printer cover.
REPLACEMEMORYPROTECTIONBATTERIESATLEASTONCEEVERYYEAR.