— 7 —
C-3. Unsolder two FCCs on the 7 segment LCD.
ASSEMBLING TIPS:
Start connecting from the NO.1 pin whose color is blue.
D. Removing the MAIN PCB, PRINTR UNIT and MOTOR
D-1. Remove one screw and then remove the PR-MOUNT.
D-2. Remove the PRINTER UNIT.
ASSEMBLING TIPS:
When assembling the PR-MOUNT, engage it between the UPPER-CASE and the PRINTER.
FFCs Soldered parts
Screw (S3)
PRINTER UNIT
PR-MOUNT
To Next Page
Loading...
