Configuring Power Saving
Function Settings
You can use the CASIO WATCHES phone
app to enable or disable power saving.
●
For details about power saving, refer to the
information below.
l
Power Saving
1.
Y
Tap the “CASIO WATCHES” icon.
2.
X
Hold down (C) for at least three
seconds. Release the button when
e
and
[CNCT] start to flash.
●
When a connection is established
between the watch and phone,
e
and
[CNCT] will stop flashing and remain on
the display.
●
If connection fails for some reason,
[ERR] will appear on the display
momentarily and then the watch will
return to the Timekeeping Mode.
Trying to connect Connected
3.
Y
Follow the displayed instructions to turn
power saving on or off.
Viewing Step Count Data
You can use the CASIO WATCHES phone
app to view the data below, which is measured
by the watch.
●
24-hour step count, calories burned
●
Weekly step count, calories burned
1.
Y
Tap the “CASIO WATCHES” icon.
2.
X
Hold down (C) for at least three
seconds. Release the button when
e
and
[CNCT] start to flash.
●
When a connection is established
between the watch and phone,
e
and
[CNCT] will stop flashing and remain on
the display.
●
If connection fails for some reason,
[ERR] will appear on the display
momentarily and then the watch will
return to the Timekeeping Mode.
Trying to connect Connected
3.
Y
Follow the instructions on the screen to
display step count data.
Note
●
You can also use CASIO WATCHES
to specify a daily step target.
●
Though the step count displayed by
the watch changes in real time, there is
a delay before it is transferred to the
CASIO WATCHES phone app.
Because of this, the step counts
displayed by the CASIO WATCHES
phone app may be different from those
displayed by the watch.
Configuring World Time
Settings
Specifying a World Time City with the CASIO
WATCHES phone app causes the watch’s
World Time City to change accordingly.
Settings can be configured to perform auto
summer time switching for the World Time
City.
Note
●
The CASIO WATCHES phone app
World Time lets you select from among
approximately 300 cities as the World
Time City.
●
You can use the CASIO WATCHES
phone app to configure settings for
user cities that are not included in the
watch’s built-in World Time Cities. You
must use the CASIO WATCHES
phone app to select a user city as your
World Time City.
Watch Operation Guide 3565
11
To Next Page
Loading...
