Resetting Watch Settings
This section explains how to return the watch
settings below to their initial factory defaults.
●
Watch Settings
●
Step Count
●
Stopwatch
●
Timer
●
Alarm
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Hold down (A) for at least two seconds.
This causes the current step reminder
setting ([ON] or [OFF]) to flash on the
display.
3. Press (C) twice.
This causes the seconds to flash.
4. Hold down (B) for at least five seconds.
Release when [ALL] stops flashing.
Note
●
While the setting is being configured,
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
●
Resetting the watch will also delete
information for pairing the watch with a
phone, and unpair them.
Other Information
This section provides non-operational
information you also need to know. Refer to
this information as required.
Supported Phones
For information about phones that can
connect with the watch, visit the CASIO
website.
https://world.casio.com/os_mobile/wat/
Specifications
Accuracy at normal temperature :
±15 seconds per month average when time
correction by communication with a phone
is not possible.
Timekeeping :
Hour, minute, second, year, month, day,
day of the week
a.m./p.m.(P)/24-hour timekeeping
Full Auto Calendar (2000 to 2099)
Step Count :
Step count measurement using a 3-axis
accelerometer
Step count display range: 0 to 999,999
steps
Step count graph
Step count reset
Auto zero-reset at midnight each day
Manual reset
Daily step goal setting
Step count setting unit: 1,000 steps
Step count setting range: 1,000 to 50,000
steps
Step Reminder
Step count accuracy
±3% (According to vibration testing)
Stopwatch/Data Recall :
Measuring unit
1/100 seconds (first hour); 1 second
(after first hour)
Measuring range: 23 hours 59 minutes 59
seconds
Measurement Functions:
Elapsed time; lap/split times; 200-record
data memory
Timer :
Measuring unit: 1 second
Measuring range: 60 minutes
Setting unit: 1 second
10-second beeper when the end of the
countdown is reached
Dual Time :
Hour, minute, second
Home Time swapping
Alarm :
Time alarm
Number of alarms: 5
Setting units: Hours, minutes
Alarm tone duration: 10 seconds
Hourly time signal: Beep every hour on the
hour
Mobile Link :
Auto Time Correction
Time setting corrected automatically at
preset time
One-touch Time Correction
Manual connection and time correction
Phone finder
Watch operation sounds the alert sound
of the mobile phone
World Time
Current time for approximately 300 cities
selected for the watch
Home Time/World Time swapping
Step count data transfer
Step count, calories
Auto Summer Time Switching
Automatic switching between standard
time and summer time
Timer Settings
Alarm Settings
TIME&PLACE
Data Communication Specifications
Bluetooth
®
Frequency Band: 2400MHz to 2480MHz
Maximum Transmission: 0 dBm (1 mW)
Communication range: Up to 2 meters
(depends on environment)
Watch Operation Guide 3565
25
To Next Page
Loading...
