Casio 5602 User Manual

Auto Time Adjustment
The watch will connect with a phone at preset
times each day and adjust its time settings.
●
Using Auto Adjust
Your watch adjusts its time setting four times
a day according to a preset schedule. If you
leave your watch in the Timekeeping Mode, it
will perform the adjustment operation
automatically as you go about your daily life,
without any operation required by you.
12:30
Important!
●
The watch may not be able to perform
auto time adjustment under the
conditions described below.
ー
While the watch is too far away from
its paired phone
ー
While communication is not possible
due to radio interference, etc.
ー
While the phone is updating its
system
ー
While PRO TREK Connected is not
running on the phone
Note
●
If the watch does not indicate the
correct time even if it is able to connect
with a phone, adjust the hand and day
indicator alignment.
l
Adjusting Hand Alignment
●
If there is a World Time City specified
with PRO TREK Connected, its time
will also be adjusted automatically.
●
The watch will connect with the phone
and perform auto time adjustment at
around 12:30 a.m., 6:30 a.m., 12:30
p.m. and 6:30 p.m. The connection is
automatically terminated after auto
time adjustment is complete.
●
Triggering Immediate Time Adjustment
The watch’s time setting will be adjusted
automatically whenever you establish a
connection between the watch and a phone.
Whenever you want to trigger immediate time
adjustment, perform the procedure below to
connect with a phone.
1. Move the phone close to (within one meter
of) the watch.
2.
X
Press (B).
[TIME] flashes to indicate that the watch
has started the connection operation.
When a connection is established
between the watch and phone, [OK] will
appear, time information will be acquired,
and then the watch’s time setting will be
adjusted.
Trying to connect
After time
adjustment
Note
●
You can perform the above operation
for time adjustment from any watch
mode.
●
The connection is terminated
automatically after time adjustment is
complete.
●
If time adjustment fails for some
reason, [ERR] will appear.
Mode Customization
You can use PRO TREK Connected to
customize modes by rearranging them on the
screen, and by deleting or adding modes.
l
Navigating Between Modes
Important!
●
You cannot perform mode
customization operations on the
watch. Use PRO TREK Connected to
configure settings.
The modes below can be rearranged or
deleted.
●
Altimeter Mode
●
Thermometer Mode
●
FISH Mode
(FISH IN TIME, sunrise and sunset times,
Moon age, tide)
●
Stopwatch Mode
●
Timer Mode
●
Alarm Mode
●
World Time Mode
1.
Y
Tap the “PRO TREK Connected” icon.
2.
X
Hold down (B) for at least two seconds
until the second hand points to [R] twice.
When a connection is established
between the watch and phone, [APP] will
change to [OK], and the second hand will
move from [R] to [C].
Trying to connect
Connection
successful
3.
Y
Perform the operations shown on the
phone screen to configure mode settings.
Note
●
Increasing or decreasing the number
of modes may change mode functions
and/or settings.
●
Even if you delete the FISH Mode, you
can still display sunrise and sunset
times, Moon age, Tide Graph, and best
FISH IN TIME on the Timekeeping
Mode screen.
Operation Guide 5602
10

Casio 5602 Specifications

General

Brand	Casio
Model	5602
Category	Watch
Language	English