Casio 5602 - Customizing Timekeeping Screen; Specify Fishing Port

●
To initialize Mode Customization
Important!
●
Initializing Mode Customization also
initializes watch settings.
1.
X
Enter the Timekeeping Mode.
l
Navigating Between Modes
2.
X
Hold down (E) for at least two seconds.
Release the button when the name of the
currently selected Home City appears on
the display.
Home City
3.
X
Press (E).
This causes the seconds to flash.
Seconds
4.
X
Hold down (A) for at least five seconds.
Release when [RESET] stops flashing.
This initializes Mode Customization.
5.
X
Press (E) to complete the setting
operation.
Customizing the
Timekeeping Mode Screen
You can use PRO TREK Connected to
rearrange display items on the Timekeeping
Mode, and to add or remove items.
Important!
●
Note that you cannot use watch
operations to configure display item
settings. Use PRO TREK Connected
to configure settings.
The items below can be displayed.
●
Day of the week, month, day
●
Barometric pressure graph, month, day
●
Hour, minute, second
●
Step count
●
Tide Graph
●
Barometric Pressure Graph *
●
World Time hour, minute *
●
Sunrise and sunset times for a specified
port (fishing point) *
●
FISH IN TIME
●
Moon age *
* Item that can be added using PRO TREK
Connected. These items are not displayed
under initial default settings.
1.
Y
Tap the “PRO TREK Connected” icon.
2.
X
Hold down (B) for at least two seconds
until the second hand points to [R] twice.
When a connection is established
between the watch and phone, [APP] will
change to [OK], and the second hand will
move from [R] to [C].
Trying to connect
Connection
successful
3.
Y
Perform the operations shown on the
phone screen to configure mode settings.
Specifying a Port (Fishing
Point)
After you use PRO TREK Connected to
specify a port, you can use the watch to view
the current time, best fishing times, sunrise
and sunset times, Moon age, and the current
tide level at the port.
Note
●
You can use PRO TREK Connected to
specify any one of 3,300 points around
the world as the port.
●
You can also use PRO TREK
Connected to specify a port using a
map.
1.
Y
Tap the “PRO TREK Connected” icon.
2.
X
Hold down (B) for at least two seconds
until the second hand points to [R] twice.
When a connection is established
between the watch and phone, [APP] will
change to [OK], and the second hand will
move from [R] to [C].
Trying to connect
Connection
successful
3.
Y
Perform the operation shown on the
phone screen to specify a port.
Operation Guide 5602
11