Casio 5602 User Manual

Other Settings
This section explains other watch settings you
can configure.
Enabling the Button
Operation Tone
Use the procedure below to enable or disable
the tone that sounds when you press a button.
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Hold down (E) for at least two seconds.
Release the button when the name of the
currently selected Home City appears on
the display.
Home City
3. Press (D) twice.
This causes [KEY♪] or [MUTE] to flash on
the display.
4. Press (C) to select [KEY♪] or [MUTE].
[KEY♪]: Operation tone enabled.
[MUTE]: Operation tone muted.
5. Press (E) twice to complete the setting
operation.
Note
●
Note that alarm and timer tones will still
sound even while the operation tone is
muted.
Reflecting Altitude
Differential in Activity
Measurements
You can use the procedure below to specify
whether or not you want to reflect altitude
differential in physical exertion
measurements.
Note
●
Reflecting altitude differential
information in activity measurements
makes it possible to obtain more
accurate activity calculations.
●
PRO TREK Connected is used to
specify your height and weight, and to
calculate physical exertion.
This information is not displayed on the
watch.
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Hold down (E) for at least two seconds.
Release the button when the name of the
currently selected Home City appears on
the display.
Home City
3. Press (D) six times.
This will display [SLOPE], followed by a
flashing [ON] or [OFF].
4. Press (C) to select [ON] or [OFF].
[ON]: Altitude differential reflected in
physical exertion measurements.
[OFF]: Altitude differential not reflected in
physical exertion measurements.
5. Press (E) twice to complete the setting
operation.
Resetting Watch Settings
This section explains how to return the watch
settings below to their initial factory defaults.
●
Watch Settings
●
Compass
●
Altimeter
●
Barometer
●
Thermometer
●
FISH Mode Settings
●
Step count data
●
Stopwatch
●
Timer
●
Alarm
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Hold down (E) for at least two seconds.
Release the button when the name of the
currently selected Home City appears on
the display.
Home City
3. Press (E).
This causes the seconds to flash.
Seconds
4. Hold down (A) for at least five seconds.
Release when [RESET] stops flashing.
5. Press (E) to complete the setting
operation.
Note
●
Resetting the watch will also delete
information for pairing the watch with a
phone, and unpair them.
Operation Guide 5602
35

Casio 5602 Specifications

General

Brand	Casio
Model	5602
Category	Watch
Language	English