19990401
u To calculate the percentage represented by each data item
[OPTN]-[LIST]-[%]
K1(LIST)l(%)1(LIST)b(List)<list number 1-20>w
• The above operation calculates what percentage of the list total is represented
by each data item.
• The result of this operation is stored in ListAns Memory.
Example To calculate the percentage represented by each data item in List 1
(2, 3, 6, 5, 4)
AK1 (LIST)l(%)
1(LIST)b(List)bw
u To calculate the differences between neighboring data inside a list
[OPTN]-[LIST]-[
AA
AA
AList]
K1(LIST)I(AList)<list number 1-20>w
• The result of this operation is stored in ListAns memory.
Example To calculate the difference between the data items in List 1
(1, 3, 8, 5, 4)
AK1 (LIST)I(AList)
bw
3-2-7
Manipulating List Data
# You can specify the location of the new list (List 1
through List 20) with a statement like: A List 1 !
List 2. You cannot specify another memory or
ListAns as the destination of the A List operation.
An error also occurs if you specify a A List as the
destination of the results of another A List
operation.
# The number of cells in the new A List is one
less than the number of cells in the original list.
#An error occurs if you execute A List for a list
that has no data or only one data item.
2/(2+3+6+5+4)
!
100 =
3/(2+3+6+5+4)
!
100 =
6/(2+3+6+5+4)
!
100 =
5/(2+3+6+5+4)
!
100 =
4/(2+3+6+5+4)
!
100 =
3 – 1 =
8 – 3 =
5 – 8 =
4 – 5 =
To Next Page
Loading...
Need help?
General
