19990401
uu
uu
u To combine lists [OPTN]-[LIST]-[Augmnt]
•You can combine to different lists into a single list. The result of a list combination
operation is stored in ListAns memory.
K1(LIST)s(Augmnt)1(LIST)b(List) < list number 1-20 >
,1(LIST)b(List) < list number 1-20 >)w
Example To combine the List 1 (–3, –2) and List 2 (1, 9, 10)
AK1 (LIST)s(Augmnt)
1(LIST)b(List)b,
1(LIST)b(List)c)w
u To transfer list contents to Matrix Answer Memory [OPTN]-[LIST]-[L!Mat]
K1(LIST)t(L!Mat)1(LIST)b(List) <list number 1-20>
,1(LIST)b(List) <list number 1-20> )w
•You can skip input 1(LIST)b(List) in the part of the above operation.
Example: List ! Mat (1, 2)w
Example To transfer the contents of List 1 (2, 3, 6, 5, 4) to column 1, and the
contents of List 2 (11, 12, 13, 14, 15) to column 2 of Matrix Answer
Memory
AK1 (LIST)t(L!Mat)
1(LIST)b(List)b,
1(LIST)b(List)c)w
3-2-8
Manipulating List Data
To Next Page
Loading...
Need help?
General
