The metronome lets you play and practice along with a
steady beat to help keep you on tempo.
1.
Press METRONOME button.
• This starts the metronome.
2.
Press METRONOME button again to stop the
metronome.
1.
Hold down the METRONOME button until the
screen shown below appears.
2.
Use the q and w arrow buttons to one of
the items below.
3.
Use the u (–) and i (+) arrow buttons to
change the setting.
4.
Press the EXIT button to exit the setting
screen.
• Changing the metronome speed (tempo) also
changes the playback tempo of Music Library songs
and MIDI Recorder songs.
Using the Metronome
To start and stop
To configure metronome settings
Display
Name
Description
Setting
Range
Beat Beat. Specifies the beat setting. The
first beat of each measure is a bell
sound, while the remaining beats are
clicks.
• A Beat setting of “0” plays a straight
click, without a bell sound.
0 to 9
Tempo Tempo. Adjusts the tempo setting.
•Press the u and i arrow buttons
at the same time sets the tempo of
last selected song.
20 to 255
Volume Volume. Adjusts the metronome
volume.
0 to 127