EN-16
Playing with Different Tones
1.
Press the SETTING button to display the
setting screen.
2.
Use the q and w arrow buttons to select
“Effect” and then press the ENTER button.
3.
Use the q and w arrow buttons to select
“Brilliance”.
4.
Use the u (–) and i (+) arrow buttons to
change the setting.
• +1 or higher: Makes the tone brighter.
–1 or lower: Makes the tone darker.
• The setting range is –3 to +3.
5.
Press the SETTING button to exit the setting
screen.
DSP makes it possible to digitally produce complex
acoustic effects. The DSP is assigned to each tone
whenever you turn on Digital Piano power.
You can split the keyboard in the center for duet play
so the left and right sides have the same ranges.
The left pedal operates as the left side damper pedal,
while the right pedal is the right side damper pedal.
The Duet Mode is the perfect way to conduct lessons,
with the teacher playing on the left side as the student
playing the same song on the right side.
• Only the damper pedal for the right side keyboard
supports half-pedal operations.
1.
Specify the number of the tone you want to
use.
• See “Selecting and Playing a Tone” on page EN-10 for
information about how to select a tone.
2.
Press the SETTING button to display the
setting screen.
3.
Use the q and w arrow buttons to select
“Duet” and then press the ENTER button.
4.
Use the q and w arrow buttons to select
“Duet Mode”.
To adjust brilliance
About DSP
To Next Page
Loading...
Need help?
General
