1.
Use the VOLUME controller to adjust the
volume.
• Your Digital Piano has a Volume Sync Equalizer
feature that automatically enhances tone quality in
accordance with the volume level. This feature
ensures that low range and/or high range sounds
are easier to hear, even at low volume levels. For
details, see “General”3”Volume Sync EQ” in the
“Parameter List” (page EN-41).
1.
Press the SETTING button to display the
setting screen.
2.
Use the q and w arrow buttons to select
“General” and then press the ENTER button.
3.
Use the q and w arrow buttons to select
“LCD Contrast”.
4.
Use the u (–) and i (+) arrow buttons to
adjust display contrast.
• The contrast setting range is 0 to 20.
5.
Press the SETTING button to exit the setting
screen.
Perform the following procedure when you want to
return the Digital Piano’s stored data and settings to
their initial factory defaults.
1.
Press the SETTING button to display the
setting screen.
2.
Use the q and w arrow buttons to select
“General” and then press the ENTER button.
3.
Use the q and w arrow buttons to select
“Factory Reset” and then press the ENTER
button.
• This causes the confirmation message “Initialize
All?” to appear.
4.
Press the ENTER button.
• This will cause the confirmation message “Sure?” to
appear.
5.
Press the i arrow button to execute the
initialize operation.
• To cancel the initialize operation, press the u arrow
button.
• The message “Please Wait...” will remain on the
display while the operation is being performed. Do
not perform any operation while this message is on
the display. “Complete!” appears on the display after
the operation is complete.
Your Digital Piano lets you lock its buttons to protect
against operation errors. For details, see “Configuring
Settings” on page EN-40, and “General” 3
“Operation Lock” in the “Parameter List” on page
EN-41.
Adjusting the Volume Level
Adjusting Display Contrast
Returning the Digital Piano to
Its Factory Default Settings
Operation Lock
To Next Page
Loading...
Need help?
General
