Casio DT-X200 Series

116
[Read operation]Tab [Read operation 2]Tab
Tab Explanation
Read operation Specify the following scanner operations when reading codes.
 Continuous read or Single read
 Swing Angle Wide, Swing Angle Middle, or Swing Angle Narrow
(Note 1)
 Enable Laser Focus or Disable Laser Focus (Note 2)
 Output OBR buffer or Output Clipboard or Output Keyboard
 Disable termination code or Termination code CR, LF, CR, LF, TAB
 Selection of the decoding level, "Normal" or "High" or "Steady".
 Normal read or Gradation read (Note 3)
 With or without filter, or with hard filter/with soft (Note 4)
Read operation 2 Specify scanner operations when reading codes.