Casio DT-X200 Series

166
3.15.2 Configuration Files
The composition of the configuration file (ini file) is as follows:
[Country] section
Key Value
Code 11: USA
13: EU countries/Japan
14: Japan
99: Custom
(Anything other than the above causes an error)
Sets the country code.
If the code is 99, the [11bg] section and the [11a] section described later are required.
If the code is 11, 13, or 14, the [11bg] section and the [11a] section are ignored.
An error occurs if no code key exists.
[11bg] section
Key Value
1ch 0: Do not use
1: Use
(Anything other than the above causes an error)
2 ch (As above)
3 ch (As above)
4 ch (As above)
5 ch (As above)
6 ch (As above)
7 ch (As above)
8 ch (As above)
9 ch (As above)
10 ch (As above)
11 ch (As above)
12 ch (As above)
13 ch (As above)
14 ch (As above)
The key displays the 11b/g channel.
Set all the keys in the table above. An error occurs if a setting is omitted.