Casio DT-X200 Series

90
(1) Basic settings
Item Content Default
SSID Specify the SSID.
Text string (up to n characters)
ADHOC Specify whether to use ad hoc mode.
Infrastructure/ ad hoc
Infrastructure
Security Specify the security system.
None/ WEP/ WPA/ WPA2
Authentication
method
Specify the authentication method.
Open
Shared
PSK
EAP-PEAP
EAP-TLS
EAP-MD5
Encryption method Specify the encryption method.
None/ WEP/ TKIP/ AES
WEP key index (*1) Set the index for the WEP key.
0~3
WEP key length (*1) Set the WEP key length.
64/128bit
WEP key (*1) Set the key to use for WEP authentication.
HEX text string
*WEP key length 64 bits: 20 characters
129 bit: 52 characters
PSK key (*2) Set the key to use when PSK authentication is
specified.
ASCII text string
EAP user name Set the user name to use if EAP-* is specified.
EAP password Set the password to use if EAP-PEAP or EAP-MD5 is
specified.
EAP domain name Set the domain name to use if EAP-PEAP is
specified.
EAP certificate Set the certificate to use if EAP-TLS is specified.
Stealth SSID (*3) Specify whether to use stealth setting with the SSID.
Stealth/ non-stealth
(*1) Setup is only required if security is WEP and the authentication method is open, shared, or
EAP-MD5.
(*2) Setup is only required if the authentication method is PSK.
(*3) This is as follows with MS standard and Casio settings.
- MS standard setup (WEC7): Automatic setup (non-stealth with a detected SSID, stealth
when SSID is added manually)
- Casio settings: Always set for stealth