E-42
1 USB Client Port This port is used to transmit system data and fi le data (download,
upload) by connecting the Cradle to a PC using a USB cable
(DT-380USB-A). A dedicated driver must be installed in the PC
before connecting the Cradle to the PC.
2 AC Adaptor Jack Connect the AC adaptor (sold separately) here.
3 Power Switch Turns the power on and off.
4
Power Supply/Data
Communication
Terminals
Power is supplied to the DT-X200 via these contacts. Also used
for data communication.
5 Terminal Detect
Switch
This switch detects when the DT-X200 is seated correctly on the
Cradle.
6 Mount Hooks These hooks are used to stabilize the Handheld Terminal when
mounting it on the cradle.
7 Power Indicator
LED
This LED indicates the power status and the mounting status of
the DT-X200.
Off: DT-X200 is not installed.
Green: Power on, DT-X200 mounted correctly.
To Next Page
Loading...
