Casio EX-10 - Copying a Group Image

133
Viewing Snapshots and Movies
. Dividing Up All Groups
IMPORTANT!
• Once a group is divided, it cannot be regrouped.
1. In the PLAY mode, press [MENU].
2. Press [4], use [8] and [2] to select the “p PLAY MENU” tab, and
then press [SET].
3. Use [8] and [2] to select “Divide Group” and then press [6].
4. Use [8] and [2] to select “All Files” and then press [SET].
5. Use [8] and [2] to select “Yes”, and then press [SET].
Use the following procedure to copy an image in a group to a location outside of the
group.
1. While CS image playback is in progress or paused, press [2].
This will display the “Edit Group” menu.
• In the case of an image shot with Intelligent Bracketing, press [2] while the
full-screen view of the image is shown.
2. Use [8] and [2] to select “Copy”, and then press [SET].
3. Use [4] and [6] to display the image you want to copy.
4. Use [8] and [2] to select “Copy”, and then press [SET].
NOTE
• The functions below cannot be performed on snapshots inside a group. Before
using either of these functions, perform the above procedure to copy the image
first.
White Balance, Brightness, Trimming, Rotation, Resize
Copying a Group Image