46
Snapshot Tutorial
With the Make-up Mode, the camera detect faces automatically and makes
adjustments to maximize facial brightness and beauty.
1. In the REC mode, press ½.
• This will enter the Make-up Mode, which is indicated by ± on the monitor
screen.
2. Use [4] and [6] to select “Make-up Level” (seventh
Control Panel icon from the top), and then press
[SET].
• You can set one of 13 levels in the range of “0 (Off)” (no correction) to “+12
(Max.)” (maximum correction). The larger the value, the greater the processing
that is performed.
3. Point the camera at the subject(s).
The camera will detect human faces and display a frame around each one.
4. Half-press the shutter button.
The camera will focus on the face, which will cause frames around it to turn
green.
5. When you are ready to shoot, press the shutter button all the way
down.
NOTE
• The following functions cannot be used together with the Make-up Mode.
Continuous Shutter, Triple Self-timer
Shooting with the Make-up Mode (Make-up)
Make-up icon
½ (Make-up)
To Next Page
Loading...
Need help?
General
