Casio Exilim EX-Z300 - Creating a Snapshot of Movie Frames; Editing a Movie on the Camera

89
Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * Movie Screen to be Used * [MENU] * PLAY Tab *
MOTION PRINT
1. Use [4] and [6] to scroll
through the movie frames
and display the one you
want to use as the image
of the MOTION PRINT
image.
Holding down [4] or [6]
scrolls at high speed.
2. Use [8] and [2] to select either “9 frames” or “1 frame” and then
press [SET].
• When “9 frames” is selected, the frame you select in step 1 will be in the center
of the MOTION PRINT image.
• Only the frames of movies recorded on this camera can be used in a MOTION
PRINT image.
Procedure
[p] (PLAY) * Movie Screen of Movie to be Edited * [MENU] *
PLAY Tab * Movie Editing
The Movie Editing feature lets you use one of the following procedures to edit out a
specific part of a movie.
Creating a Snapshot of Movie Frames (MOTION PRINT)
Editing a Movie on the Camera (Movie Editing)
Cut (To-Point Cut)
Cuts everything from the beginning of the movie
up to the current location.
Cut (Point-To-Point Cut) Cuts everything between two points.
Cut (From-Point Cut)
Cuts everything from the current location to the
end of the movie.
9 frames 1 frame
}
~
¡