70
Using BEST SHOT
With HDR (High Dynamic Range), the camera shoots a series of CS images using
different exposure settings and combines them into a final image to correct for
overexposure or underexposure of subjects of different brightness levels.
1. In the REC mode, press Õ (Continuous Shutter).
2. Select “HDR” and then press [SET].
3. Press the shutter button to shoot.
• After you press the shutter button, the message “Busy... Please wait...” will
appear on the monitor screen to indicate that recording is in progress. Keep the
camera still while this message is displayed. The recording process takes
some time to complete after the message appears. Image shooting is disabled
while the message is displayed.
NOTE
• HDR works best when shooting with the camera mounted on a tripod.
• With this BEST SHOT scene, the flash setting automatically becomes
?
(Flash
Off).
• Shooting with this BEST SHOT scene makes the shooting range narrower than
normal.
• The desired HDR effect may not be attained if the camera or subject moves during
shooting.
• Depending on shooting conditions and image composition, this BEST SHOT scene
may not be able to produce the desired result.
Digitally Correcting for Overexposure and Underexposure
(HDR)
To Next Page
Loading...
Need help?
General
