158
Other Settings (Set Up)
Other Settings (Set Up)
This section explains menu items that you can use to configure settings and perform
other operations in both the REC mode and PLAY mode.
Procedure
[MENU] * Set Up Tab * ECO Mode
Enabling power saving reduces the brightness of the monitor screen and switches
other camera operations to low-power operation, which allows a charge to last longer
and increases the number of images that can be shot between charges.
Selecting “On” enters the “ECO Mode”, which is indicated by e on the monitor
screen. The power saving effect of the “ECO Mode” is most efficient when “Auto” is
selected for the recording mode. Use the “Auto” recording mode is recommended
when using the “ECO Mode”.
NOTE
• You can achieve even greater power savings by using the “ECO Mode” in
combination with Auto Power Off (page 164) and Sleep (page 164).
Procedure
[MENU] * Set Up Tab * Screen
• Turning on the “ECO Mode” (page 158) while the “Screen” setting is +2 or +1 will
cause the “Screen” setting to change to 0.
For information about menu operations, see page 91.
Enabling Power Saving (ECO Mode)
Adjusting Monitor Screen Brightness (Screen)
Auto
With this setting, the camera detects available light levels and
automatically adjusts the brightness of the monitor screen accordingly.
+2
Brightness that is greater than +1, which makes the screen easier to view.
This setting consumes more power.
+1 Bright setting for outdoor use, etc. Brightness that is greater than 0.
0 Normal monitor screen brightness for indoor use, etc.
–1
Low monitor screen brightness for nighttime use, indoor use under dark
conditions, etc.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
