61
Snapshot Tutorial
• You can use the Manual Mode while a continuous shutter mode is selected. To do
so, set the mode dial to [A], [S], or [M].
• When shooting CS images, the snapshot image quality automatically changes to
“Normal”.
• If there is not enough available capacity on the memory card, you may not be able
to record the number of CS images indicated on the monitor screen. Make sure
your memory card has sufficient remaining capacity before shooting with using
continuous shutter.
• With High Speed CS, exposure and focus for the first image are applied for
successive images as well.
• When using a continuous shutter mode, keep the camera still until shooting is
finished.
• With High Speed CS, the flash setting automatically becomes ? (Flash Off).
• Zoom is disabled during continuous shutter operations.
• The following image sizes cannot be selected while shooting with High Speed CS:
“3:2”, “16:9”. Entering the High Speed CS mode while any one of these image
sizes is selected will cause the image size setting to change to “16M”
automatically.
• With High Speed CS, the maximum number of images that can be recorded during
each session is limited, regardless of how much memory card storage capacity is
available.
The number of images will be restricted even further or shooting may be impossible
when remaining memory card capacity is less than the allowable number of images
for a particular CS mode.
• The Triple Self-time cannot be used in the High Speed CS mode.
• The Self-timer cannot be used in the Prerecord CS mode.
• You cannot enter the Continuous Shutter (CS) mode while Premium Auto PRO is
being used. The camera will automatically shoot a series of images if it determines
current shooting conditions require it.
• Single SR Zoom and Multi SR Zoom cannot be used in combination with High
Speed CS.
Continuous Shutter Precautions
High Speed CS
Specified maximum number of continuous shutter shots
(Max CS shots)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
