59
Snapshot Tutorial
8. Use [8] and [2] to select the fourth control panel option from the top
(Prerecord CS shots).
9. Use [4] and [6] to specify how many of the 30 images and for how
long images should be pre-recorded in the buffer.
• Prerecord CS shooting is not performed when the number of buffer images and
the recording time are both zero. Note that the mechanical shutter is used
when shooting with High Speed CS.
10.
Press [SET].
• The approximate number of recordable CS images will appear on the monitor
screen.
Shutter button full-press
Number of pre-record
images and pre-record
time
Number of remaining images
and remaining recording time
after the shutter button full-
press
Allowable CS time*/Number of CS images
*Appears only if you are using Prerecord CS.
Remaining snapshot memory capacity
To Next Page
Loading...
