Results:
Normalized variate ( t): -0.762
P(t): 0.223
Base-n Calculations (BASE-N)
Press
(BASE-N) to enter the BASE-N Mode when you want to
perform calculations using decimal, hexadecimal, binary, and/or octal
values.
The initial default number mode when you enter the BASE-N Mode is
decimal, which means input and calculation results use the decimal
number format.
Press one of the following keys to switch number modes: (DEC) for
decimal, (HEX) for hexadecimal, (BIN) for binary, or (OCT) for
octal.
Example 1: To enter the BASE-N Mode, switch to the binary mode, and
calculate 11
2
+ 1
2
(BASE-N)
(BIN)
11
1
Example 2: Continuing from above, switch to the hexadecimal mode and
calculate 1F
16
+ 1
16
(HEX) 1 (F) 1
Example 3: Continuing from above, switch to the octal mode and
calculate 7
8
+ 1
8
(OCT) 7 1
50
To Next Page
Loading...
