E-31
• m, m
1
, m
2
and n are not variables. They are commands of the type that take
an argument immediately before them. See “Calculating Estimated Values”
for more information.
Minimum Value: minX*, minY, Maximum Value: maxX*, maxY
11(STAT/DIST) 6(MinMax) 1
to
2
(When the single-variable statistical calculation is selected.)
11(STAT/DIST) 6(MinMax) 1
to 4
(When a paired-variable statistical calculation is selected.)
First Quartile: Q1, Median: med, Third Quartile: Q3
11(STAT/DIST) 6(MinMax) 3
to 5
(When the single-variable statistical calculation is selected.)
Note: While single-variable statistical calculation is selected, you can input
the functions and commands for performing normal distribution calculation
from the menu that appears when you perform the following key operation:
11 (STAT/DIST) 5 (Distr). See “Performing Normal Distribution
Calculations” for details.
To input the single-variable data
x = {1, 2, 2, 3, 3, 3, 4, 4, 5}, using
the FREQ column to specify the number of repeats for each items
({x
n
; freq
n
} = {1;1, 2;2, 3;3, 4;2, 5;1}), and calculate the mean and
population standard deviation.
1N(SETUP)c4(STAT)1(ON)
N3(STAT)1(1-VAR)
1 = 2 = 3 = 4 = 5 =ce
1 = 2 = 3 = 2 =
A11(STAT/DIST)4(Var)2(o)=
A11(STAT/DIST)4(Var)3(σ
x)=
Results: Mean: 3 Population Standard Deviation: 1.154700538
To calculate the linear regression and logarithmic regression
correlation coefficients for the following paired-variable data and
determine the regression formula for the strongest correlation: (
x, y)
= (20, 3150), (110, 7310), (200, 8800), (290, 9310). Specify Fix 3
(three decimal places) for results.
1N(SETUP)c4(STAT)2(OFF)
1N(SETUP)6(Fix)3
N3(STAT)2(A+BX)
20 = 110 = 200 = 290 =ce
3150 = 7310 =8800 = 9310=
A11(STAT/DIST)5(Reg)3(r)=
A11(STAT/DIST)1(Type)4(In X)
A11(STAT/DIST)5(Reg)3(r)=
A11(STAT/DIST)5(Reg)1(A)=
22
STATSTAT
33
STAT
FIX
STAT
FIX
To Next Page
Loading...
