E-4
Reading the Display
The display of the calculator shows expressions you input, calculation results,
and various indicators.
Input expression Indicators
Calculation result
• If a ' indicator appears on the right side of the calculation result, it means
the displayed calculation result continues to the right. Use e and d to
scroll the calculation result display.
• If a g indicator appears on the right side of the input expression, it means
the displayed calculation continues to the right. Use e and d to scroll the
input expression display. Note that if you want to scroll the input expression
while both the ' and g indicators are displayed, you will need to press A
first and then use e and d to scroll.
Display indicators
This
indicator:
Means this:
The keypad has been shifted by pressing the 1 key. The
keypad will unshift and this indicator will disappear when
you press a key.
The alpha input mode has been entered by pressing the
S key. The alpha input mode will be exited and this
indicator will disappear when you press a key.
M
There is a value stored in independent memory.
STO
The calculator is standing by for input of a variable name to
assign a value to the variable. This indicator appears after
you press 1t(STO).
RCL
The calculator is standing by for input of a variable name to
recall the variable’s value. This indicator appears after you
press t.
STAT
The calculator is in the STAT Mode.
CMPLX
The calculator is in the CMPLX Mode.
MAT
The calculator is in the MATRIX Mode.
VCT
The calculator is in the VECTOR Mode.
7
The default angle unit is degrees.
8
The default angle unit is radians.
9
The default angle unit is grads.
FIX
A fixed number of decimal places is in effect.
SCI
A fixed number of significant digits is in effect.
Math
Natural Display is selected as the display format.
$`
Calculation history memory data is available and can be
replayed, or there is more data above/below the current
screen.
Math
Math
Math
Math
To Next Page
Loading...
Need help?
General
