Heart Rate Monitor
●
The back cover of the watch has a built-in photosensor that detects your
pulse. This is used to calculate and display an approximate heart rate value.
The factors below can cause error in the displayed heart rate value.
ー
How the watch is fastened to the wrist
ー
Individual wrist characteristics and conditions
ー
Training type and/or intensity
ー
Sweat, dirt, and/or other foreign matter near the sensor
ー
Being submersed while swimming, etc.
All of this means that heart rate values displayed by the watch are
approximate, and no guarantees are made concerning their accuracy.
●
The heart rate monitor function of this watch is intended for recreational
purposes, and should not be used in any way for medical purposes.
Other Product Precautions
Wi-Fi connectivity
Note that when using a Wi-Fi connection you need to be aware of the watch’s
battery level and your surrounding environment. A low battery or extreme cold
can cause Wi-Fi operation to shut down automatically to protect the watch’s
system.
Protective stickers
●
Be sure to remove all protective stickers and/or paper tags that may be
affixed to your watch (including its back cover) and/or its band when you
purchase it. Using the watch without removing protective stickers and/or
paper tags may result in the build-up of dirt between the watch/band and
the sticker/paper tag, which creates the risk of rust and skin rash.
EN-113