User Maintenance
Caring for Your Watch
Remember that you wear your watch next to your skin, just like a piece of
clothing. To ensure your watch performs at the level for which it is designed,
keep it clean by frequently wiping with a soft cloth to keep your watch and
band free of dirt, sweat, water and other foreign matter.
●
Whenever your watch is exposed to sea water or mud, rinse it off with clean
fresh water.
●
For a resin band, wash with water and then wipe dry with a soft cloth. Note
that sometimes a smudge like pattern may appear on the surface of a resin
band. This will not have any effect on your skin or clothing. Wipe with a cloth
to remove the smudge pattern.
●
To clean the metal parts on a resin band, use a soft toothbrush or similar
tool to scrub the band with a weak solution of water and a mild neutral
detergent, or with soapy water. Next, rinse with water to remove all
remaining detergent and then wipe dry with a soft absorbent cloth. When
washing the band, wrap the watch case with kitchen plastic wrap so it does
not come into contact with the detergent or soap.
●
Not operating buttons for long periods can lead to operation problems.
Press buttons occasionally to maintain proper operation.
●
Charging may take longer or may not be possible at all if there is dirt or other
foreign matter on the charger terminal or on the charger cable connector.
Use a clean, dry cloth or cotton swab to occasionally wipe the charger
terminal and charger cable connector.
EN-120
To Next Page
Loading...
