Casio G-Shock GSW-H1000 - Using a Different Watch Face; Changing to Another Watch Face

Using a Different Watch Face
In addition to the watch’s initial default “DIGITAL” watch face, the Wear OS
by Google function can be used to select any one of a number of other
different watch faces. You can add CASIO, Google, and third-party watch
faces.
Important!
●
If you are using a non-CASIO watch face, you cannot return to it
following an activity measurement operation. If you want to return to a
non-CASIO watch face, long-press the screen and then re-select the
watch face .
●
Even if you change to another watch face, the watch face automatically
switches to “DIGITAL” during activity measurement operations.
Changing to Another Watch Face
1. While a watch face is displayed, hold your finger down
in the center of the screen for about two seconds.
●
This displays the watch face list.
2. Swipe the touch screen left or right to scroll though the
available watch faces. When the one you want is
displayed tap it.
●
For example, tap the “2 Layers” CASIO watch face. For details about
“2 Layers”, see “Using the “2 Layers” CASIO Watch Face”.
Note
●
You can tap “See more watch faces” on the watch face list that appears
in step 1 above and install other watch faces.
EN-86