1. If the watch is turned off, hold down the power button for at least two
seconds to turn it on.
2. Tap the watch display. On the screen that appears, select a language.
3. Swipe the screen upwards to display the watch name (GSW-H1000).
4. On your phone, start up the Wear OS by Google app.
The term “watch” in the text below refers to a smartwatch powered with
Wear OS by Google.
5. If this is the first time you are pairing your phone and watch, start up
the Wear OS by Google app on your phone. Next, tap “Set it up”.
●
Now, follow the instructions that appear on your phone screen to
complete the pairing procedure.
If you are using an existing phone that is paired with a watch, you need to
perform one of the procedures below in place of step 5 above. The
procedure you should use depends on your phone type.
Android Phone Users
You can have multiple watches paired with an Android phone at the same
time.
In the upper left corner of the Wear OS by Google app screen, tap the
watch name. On the menu that appears, tap “Add a new watch”.
●
Now, follow the instructions that appear on your phone screen to
complete the pairing procedure.
EN-29
To Next Page
Loading...
