Casio KL-7000 - To Select a Feed Option; Block Spacing; To Specify the Block Spacing; To Specify Vertical Printing

44
To select a feed option
1. Press FORM to display the FORM menu.
2. Use K and L to highlight FEED, and press SET.
3. Use K and L to highlight the option that you want (LONG, SHORT, M-FEED).
4. Press SET to set the option and return to the text input screen.
Block Spacing
You can specify the amount of space to be inserted between each block. You can select
any one of three different block spacings: NONE (0mm), NARROW (2mm), and WIDE
(4mm).
To specify the block spacing
Example: For the two-block text “ABXYZ”, “Computer Company”, change the spacing to
WIDE.
1. Input the text and define the two blocks.
2. Press FORM to display the FORM menu.
3. Use L to highlight BL-SPACE, and press SET.
4. Use K and L to select the block spacing you want.
• In this example, you should select WIDE.
5. After selecting the block spacing, press SET to apply the setting and return to the text
input screen.
To specify vertical printing
1. Input the text you want to print.
2. Press FORM to display the FORM menu.
FUNC
SHIFT
CODE
VERT
MIROR
OVER
CAPS
A
AA
A
SANS-SERIF
MANUAL FEED
6mm
SET
Yes No
ESC
A
FEED
LONG
SHORT
M FEED
FUNC
SHIFT
CODE
VERT
MIROR
OVER
CAPS
A
AA
A
SANS-SERIF
MANUAL FEED
6mm
SET
Yes No
ESC
A
BL SPACE
NONE
NARROW
WIDE
FUNC
SHIFT
CODE
VERT
MIROR
OVER
CAPS
A
A
SET
Yes No
ESC
LENGTH
PITCH
FEED
BL SPACE