65
Part 11
Reference
This section contains information about the Label Printer that you can use as a reference
when you need it.
Cleaning the Printer Head and Roller
A dirty printer head and roller can result in poor printing quality. If you have problems with
print quality, use the following procedure to clean the printer head and roller.
To clean the printer head and roller
1. Make sure the Label Printer is switched off.
2. Press the tape cartridge compartment cover release and open the compartment cover.
3. Remove the tape cartridge.
4. Use a cotton swab dipped in alcohol to clean
the printer head and roller as shown in the il-
lustration.
5. Replace the tape cartridge and close the compartment cover.
Roller
Printer head
To Next Page
Loading...
