Casio KL-7000 User Manual

57
2. Press PRESETS.
3. Use K and L to move the highlighting to NUMBER,
and then press SET.
4. Use H and J to move the cursor to the start point,
and then press SET.
• After you highlight the number, you can increase it
by pressing K or decrease it by pressing L.
• You can only highlight numbers. You cannot high-
light alpha characters.
5. Use H and J to move the cursor to the end point,
and then press SET.
6. Press PRINT to start the print operation.
7. Cut the tape and then press PRINT to print the next label.
• The number is automatically increased with each printing operation you perform.
8. Repeat step 6 as many times as necessary.
• You can abort the number printing operation at any time by pressing ESC.
FUNC
SHIFT
CODE
VERT
MIROR
OVER
CAPS
A
A
SET
Yes No
ESC
LAYOUT
PHRASES
NUMBER
FUNC
SHIFT
CODE
VERT
MIROR
OVER
A
AA
A
SANS-SERIF
MANUAL FEED
6mm
SET
Yes No
ESC
A
FROM?
R 111
FUNC
SHIFT
CODE
VERT
MIROR
OVER
CAPS
A
AA
A
SANS-SERIF
MANUAL FEED
6mm
SET
Yes No
ESC
A
NUMBER
PRINT?
ER 111

Casio KL-7000 Specifications

General

Brand	Casio
Model	KL-7000
Category	Label Maker
Language	English