48
EN
Copying and Pasting Input Text
Copying Text
1.
While inputting text, press COPY.
2.
Move the cursor to the fi rst character of the text you want to copy and
then press SET.
3.
Move the cursor to the last character of the text you want to copy and
then press SET.
•
You can copy up to 49 characters.
•
The printer retains up to nine of the last items copied. Performing a
copy operation while nine items are already saved will cause the oldest
copy to be deleted to make room for the new one.
•
Any size factor indicators, line break symbols, and block indicators in
the copied text will be replaced by a space.
Pasting Copied Text
1.
Press PASTE.
2.
Select the text you want to paste and then press SET.
Creating a User Character
You can create user characters that are not included with the printer's normal
character and symbol set.
•
You can have up to four user characters stored in printer memory.
•
You cannot confi gure character style settings for a user character.
•
You can use either of the two methods below to create a user character.
- From scratch: Use this method when you want to create a user character
from scratch.
- Modifying an existing character: With this method, you modify an existing
character to create a user character.
Creating a User Character from Scratch
1.
Press USER CHR.
•
If there is no character at the current cursor position, a user character
creation screen (as shown in step 4 below) will appear. Go directly to
step 4.
2.
Select MAKE and then press SET.
3.
Select NEW and then press SET.
To Next Page
Loading...
Need help?
General
