EasyManuals Logo

Casio LK-280 User Manual

Casio LK-280
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #58 background imageLoading...
Page #58 background image
Using a Memory Card
E-56
Memory Card Data (File) Storage Locations
The above procedure stores Digital Keyboard data in a folder
named “MUSICDAT” on the memory card.
The “MUSICDAT” folder is created automatically when you
format the memory card on the Digital Keyboard (page
E-54).
If you store a file in any location other than inside the
“MUSICDAT” folder, you will not be able to recall, delete, or
play the file on the Digital Keyboard. You also will not be
able to recall, delete, or play any file you store inside of a
subfolder you create inside the “MUSICDAT” folder.
The message “No File” will appear on the display if you try
to perform a recall, delete, or play operation while there is
no file inside the “MUSICDAT” folder.
Use the following procedure to load data from a memory card
into Digital Keyboard memory.
Whenever you copy a file to the memory card that you
plan to recall on the Digital Keyboard, be sure to store
the file in the memory card’s “MUSICDAT” folder.
1.
On the Digital Keyboard, select the data you
want to load as described below.
2.
Insert the memory card that contains the data
into the memory card slot.
3.
Hold down
bq
until the screen shown below
appears on the display.
To cancel data load, press
bq
again.
4.
Press the
br
(10-key) [9] (ENTER) key.
Pressing [7] (EXIT) will return to the screen that was
displayed before you pressed [9] (ENTER).
5.
Use the
br
(10-key) [–] and [+] keys to select
the data (file) you want to load.
6.
Press the
br
(10-key) [9] (ENTER) key.
This will load the data into Digital Keyboard memory.
If there is already data stored in the user area where
you are trying to load data, an overwrite confirmation
message will appear. Press the
br
(10-key) [+] (YES)
key to overwrite, or [–] (NO) or [7] (EXIT) key to cancel.
Loading Data from a Memory
Card into Digital Keyboard
Memory
To load this type
of data
Do this
Sampled sound Select the tone number of the sampled
sound you want to load.
User song Select the song number of the song you
want to load.
Recorded song Select the song you want to load and
put the Digital Keyboard in playback
standby.
All data Select one of the Digital Keyboard’s
default built in tones, songs, etc.
* * * * * * * *
Flashes
C o m
p
l e t e
R e
p
l a c e ?

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Casio LK-280 and is the answer not in the manual?

Casio LK-280 Specifications

General IconGeneral
Control typeButtons
Backlight buttonsYes
MIDI-keyboard number of keys61 keys
Battery typeAA
Power source typeAC, Battery
Number of batteries supported6
Product colorGray
Sound effectsChorus, Reverberation
Volume controlDigital
Maximum polyphony (notes)48
Music memory capacity (songs)10
InterfaceUSB
Headphone outputs1
Cables includedAC
Weight and Dimensions IconWeight and Dimensions
Depth350 mm
Width948 mm
Height103 mm
Weight4500 g

Related product manuals