EN-76
Editing Events
1.
On the EVENT EDIT screen, touch “Setting”.
2.
Touch “Note Modify Setting”.
3.
Touch one of the items below and then use the 9 w/NO, q/YES buttons to change the setting.
• To change a setting value in increments of 10, hold down the 9 w/NO or q/YES button as you rotate the bp VALUE
dial.
4.
Touch bo EXIT to return to the EVENT EDIT screen.
5.
On the EVENT EDIT screen, select the event whose velocity you want to adjust.
• For information about how to select an event, see “To select an event for editing” (page EN-73) or “To select multiple
events” (page EN-73).
6.
Touch “Detail”.
7.
Touch “Velocity Modify”.
This adjusts the velocity value of the note event you selected in step 5.
To adjust the velocity value of a note event
Item Description Setting
Velocity Modify Fix
(Fixed value)
Specifies a fixed value as the velocity value. Select “Off” for this
setting to adjust based on the current velocity value of each note
event.
Off, 0 to 127
Velocity Modify Rate
(Velocity rate)
These settings are enabled only when “Off” is selected for the
“Velocity Modify Fix” setting item. They change the velocity value of
each note event according to the mathematical expression shown
below.
(Current Velocity) × (Rate Setting) + (Offset Setting)
000% to 100% to 200%
Velocity Modify Offset
(Velocity offset)
–126 to 000 to +126
To Next Page
Loading...
Need help?
General
Weight and Dimensions
