Editing Events
EN-77
1.
On the EVENT EDIT screen, touch “Setting”.
2.
Touch “Note Modify Setting”.
3.
Touch one of the items below and then use the 9 w/NO, q/YES buttons to change the setting.
• To change a setting value in increments of 10, hold down the 9 w/NO or q/YES button as you rotate the bp VALUE
dial.
4.
Touch bo EXIT to return to the EVENT EDIT screen.
5.
On the EVENT EDIT screen, select the event whose gate time you want to adjust.
• For information about how to select an event, see “To select an event for editing” (page EN-73) or “To select multiple
events” (page EN-73).
6.
Touch “Detail”.
7.
Touch “Gate Time Modify”.
This adjusts the gate time value of the note event you selected in step 5.
To adjust the gate time value of a note event
Item Description Setting
Gate Time Modify Fix
(Fixed value)
Specifies a fixed value as the gate time value. B99T95 stands for
quarter note 99 beats, 95 ticks. Select “Off” for this setting to adjust
based on the current gate time value of each note event.
Off,
B000T000 to B999T999
Gate Time Modify Rate
(Gate time rate)
These settings are enabled only when “Off” is selected for the “Gate
Time Modify Fix” setting item. They change the gate time value of
each note event according to the mathematical expression shown
below.
(Current Gate Time) × (Rate Setting) + (Offset Setting)
000% to 100% to 200%
Gate Time Modify Offset
(Gate time offset)
–126 to 000 to +126
To Next Page
Loading...
Need help?
General
Weight and Dimensions
