Casio PX-130 User Manual

– 29 –
5. Remove eight rubber keys.
NOTE: One rubber key is shorter than the others.
Rubber keys Short rubber key
Rubber keys
Short rubber key
4. Remove the keyboard PCBs (MACP-KYA1/KYA2, KYB1/KYB2).
MACP-KYB1 PCBMACP-KYB2 PCB
MACP-KYA2 PCB MACP-KYA1 PCB
<Before change> <After change>
PLATE (Before change)
<If the PLATE comes off>
The PLATE is a transparent plastic plate. If the plate comes off, put it on the place where the FFC is,
and insert its end into place where the blue line is shown in the image.
NOTE: The design of the PLATE was modied after the mass production.
The new types of plates are installed in PX-130RD since the beginning of mass production.

Casio PX-130 Specifications

General

Polyphony	128 notes
Tones	16 built-in tones
Speakers	2 x 8W
Amplifier Output	8W + 8W
MIDI	Yes
USB	Yes
Touch Response	3 sensitivity levels, Off
Lesson Function	Yes
Recorder	2 tracks, 1 song
Metronome	Yes
Pedals	Included SP-3
Power Consumption	18W
Keyboard	88-key, Scaled Hammer Action
Weight	11.2 kg
Digital Effects	Reverb (4 types)
Built-in Songs	60 songs
Terminals	USB, Pedal
Power Requirements	AC adaptor AD-A12150LW
Touch Sensitivity	3 levels, off
Transpose	25 steps (-12 to +12 semitones)
Connectors	USB, Pedal
Power Supply	AC adaptor AD-A12150LW
Included Accessories	Music stand
Recorder Capacity	Approximately 5, 000 notes
Tuning	A4 = 415.5Hz to 465.9Hz