Casio PX-150 - CONSOLE PCB REMOVAL PROCEDURE; REMOVE THE CNA PCB UNIT

PX-150
– 20 –
G. Remove the PCB UNIT/CNA
NOTE: The PCB UNIT/CNA consists of the CNA1 PCB and CNA2 PCB.
G-1. Disconnect one connector from the MDA1 PCB.
MDA1 PCBCNA1 PCBCNA2 PCB
PCB UNIT/CNA
Connector
G-2. Undo 13 screws and then remove the PCB UNIT/CNA.
SPONGE/35X60
SPONGE/35X150
PCB UNIT/CNA