Advanced Operations
QT-6000 User’s Manual
75
E
Programming descriptors and messages
Programming item descriptor (flat-PLU) procedure
Step 1. Press ° and <PGM2> icon to turn “PGM-2”, select “1.Item Descriptor” and press `.
Step 2. Select “1.PLU” and press
`.
Step 1. screen Step 2. screen
Step 3. Select the PLU record you want to program by pressing the flat-PLU key directly, by entering PLU record
No. and
`, or by entering random PLU code and +.
Step 4. Enter characters and ¥.
Step 3. screen Step 4. screen
Step 5. Repeat the step 4., if you program the next record.
Press \ and repeat the step 3. and 4., if you program to the other record.
Step 6. Press
\ repeatedly to return to the “Step 1. screen”.
P2
C
01 31-10-04 06:34 PM 000123
PGM-2
1.Item Descriptor
2.Char & Message
0.00
Item Descriptor
Item Descriptor
1.PLU
2.PLU 2nd@
3.Sub-Department
4.Department
5.Range
6.PLU -> 2nd@ Copy
7.Char & Press key
8.Pulldown Group
0.00
Item Descriptor
PLU
1.PLU001
2.PLU002
3.PLU003
4.PLU004
5.PLU005
6.PLU006
7.PLU007
8.PLU008 ´
0.00
No. Descriptor
5 PLU005
6 PLU006
7 PLU007
8 PLU008
9 PLU009
10 PLU010
11 PLU011
12 PLU012
13 PLU013
14 PLU014
15 PLU015 ´
PLU0005
To Next Page
Loading...
