— 47 —
Operation
Manager key lock test
Turn control lock key in the
following order.
0➔1➔2➔OFF➔ON➔5➔6➔7
[ENTER]
Clerk key lock test
[ENTER]
ETHERNET test
MCR test
Read the card while display
indicates;
A : \ >
[T][S][T][9][5][5][ENTER] for SA-5000
[T][S][T][9][5][6][ENTER] for SA-5100
[ENTER]
[ENTER]
[ENTER]
To be checked
Display indicates;
✼✼✼✼✼✼ MANAGER KEYLOCK TEST ✼✼✼✼✼✼
TEST KEYLOCK BY TURNING TO DIFFERENT
POSITION (0 TO 7) PRESS [ENTER] KEY TO
END THE TEST
1234567
Display indicates;
✼✼✼✼✼✼ CLERK KEYLOCK TEST ✼✼✼✼✼✼
Test the keylock with different keys Press
[ENTER] key to end the Test
Display indicates;
✼✼✼ NET WORK TEST ✼✼✼
Should be PASSED
Display indicates;
A:\
987654321098765432109876543210987654321098765432
1098765432109876543210987654
Bad command or file name
A:\>198506050055555
Display indicates;
A : \ > cycle
•
•
A : \ > pause
Press any key to continue......
Lines should be square to the dis-
play frame.
A : \ > pause
Press any key to continue......
Lines should be square to the dis-
play frame.
A : \ > pause
Press any key to continue......
There should be no unevenness
of the color or missing dot.
Print
0
1
2
3
4
5
6
7
MASTER KEY TESTED
OPERATOR KEY TESTED
ETHERNET TEST PASSED
<SA-5100>
1014545890101454589010145458901014545890101456458
1014545890101454589010145458901014545890101456458
1014545890101454589010145458901014545890101456458
1014545890101454589010145458901014545890101456458
1014545890101454589010145458901014545890101456458
1014545890101454589010145458901014545890101456458
Auto Half Cut
------------------ – ----------------