Casio SE-S100

57
Advanced features
Advanced features
Simple settings
 Simple setting of key catch tones
You can set whether to sound key catch tones or not by simple programming.
Step Operation
1 Turn the Mode switch to PGM position and press Z and
o keys.
Zo
2 Input 10800 from ten key pad and press o key.
Z?<??o
3 Input 0 (sound key catch tones) or 1 (not sound key catch
tones) and press p key. The example on the right is for
not sounding key catch tones.
Zp
 Simple setting of double height printing
By this setting, the Cash Register prints receipts with double height characters.
Step Operation
1 While Mode switch is in PGM position, press Z and
o keys.
Zo
2 Input 10200 from ten key pad and press o key.
Z?X??o
3 Input 0 (normal character height) or 1 (double character
height) and press p key. The example on the right is for
setting double height characters.
Zp
After the above setting, the Cash Register prints the following receipts in REG mode.
21−01−2015 09:40
REG 000003
DEPT01
•1.00
TOTAL
•1.00
CASH
•1.00